Screened/Braid Shielded Multi Core ATC Cable
Braided wire is a type of shielding that gets built into a cable for two reasons: To protect the cable from electromagnetic interference (EMI). To increase the flex life and mechanical strength of a cable.
At a Glance
- Braid Shield : Provides superior structural integrity while maintaining good flexibility and flex life. Are ideal for minimizing low frequency interference and have lower DC resistance than foil. Effective at audio, as well as RF ranges.
- Foil Shield : Provides 100% cable coverage, necessary for electrostatic shield protection. Commonly used to shield individual pairs of multi pair data cables to reduce crosstalk because of their small size. Drain wires used with foil shield to make termination easier and to ground electrostatic discharges.
- Combination Shield : Provides maximum shield efficiency across the frequency spectrum. The combination foil/braid shield combines the advantage of 100% foil coverage plus the strength and low DC resistance of the braid.
- Wires & Cables
- In-Stock
- Coming Soon
Multicore Screened Cable, Rohs FR PVC Insulated, Tinned Copper Conductor, Core Twisted & Tapped . with Polyster & Aluminium Foil and Breaded With Tinned Copper Wire & Rohs-FR-PVC Sheathed Cable.
SGI offers a choice of high quality Screened/Shielded & Braided Multi Core ATC Cables which consists of cores made of flexible tinned copper conductors with ROHS FR PVC Insulation and Sheathing. To avoid electromagnetic interference these Cables have a outer sheath with a copper braided shield between the sheaths which serves to avoid in building systems and were equipment is in environments where electromagnetic interference would be unacceptable. These control and signal cables are used in the milli-ampere range for computer systems, electronic control equipment, office machines, scales etc. and wherever the thinnest possible control cables are required.
| Size in Sq.mm | Product Code 2 Core | Product Code 3 Core | Product Code 4 Core | Product Code 6 Core | Product Code 8 Core | Product Code 10 Core | Product Code 12 Core |
|---|---|---|---|---|---|---|---|
| 0.5 | SA-2401 | SA- 2402 | SA-2403 | SA-2404 | SA-2405 | SA-2406 | SA-2407 |
| 0.75 | SA-2411 | SA- 2412 | SA-2413 | SA-2414 | SA-2415 | SA-2416 | SA-2417 |
| 1 | SA-2421 | SA-2422 | SA-2423 | SA-2424 | SA-2425 | ||
| 1.5 | SA-2431 | SA-2432 | SA-2433 | SA-2434 | |||
| 2.5 | SA-2441 | SA-2442 | SA-2443 | SA-2444 |
- Standard Color of Outer Sheath : Black
- Standard Packing: 100 Meters
SGI make data control Multicore Braided Cables, Annealed Tinned Copper Conductor, ROHS PVC Insulated Core Twisted & Tapped/ Polyster and Braided with Tinned Copper Wire & ROHS PVC Sheathed Cables.
| Size in Sq.mm | No. of Strands | Product Code 2 Core | Product Code 3 Core | Product Code 4 Core | Product Code 6 Core | Product Code 8 Core | Product Code 10 Core | Product Code 12 Core | Product Code 16 Core | Product Code 20 Core |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.2 | 7/36(7/.0076) | SA-2301 | SA-2302 | SA-2303 | SA-2304 | SA-2305 | SA-2306 | SA-2307 | SA-2308 | SA-2309 |
| 0.4 | 14/36(14/.0076) | SA-2321 | SA-2322 | SA-2323 | SA-2324 | SA-2325 | SA-2326 | SA-2327 | SA-2328 | SA-2329 |
| 0.125 | 7/38(7/.0060) | SA-2341 | SA-2342 | SA-2343 | SA-2344 | SA-2345 | SA-2346 | SA-2347 | SA-2348 | SA-2349 |
| 0.25 | 14/38(14/.0060) | SA-2361 | SA-2362 | SA-2363 | SA-2364 | SA-2365 | SA-2366 | SA-2367 | SA-2368 | SA-2369 |
- Standard Color of Outer Jacket : Grey
- Standard Packing : 90 Meters per coil
- Manufactured using Flexible Annealed Tinned Copper Conductor.
- Insulation and sheathing by specially formulated ROHS FR PVC Compound.
- Polyester and Aluminum Foil Shielded (Screened) and Braided with ATC Copper Conductor to avoid electromagnetic interference.
- Available Size from 0.5 to 2.5sq.mm in 2,3,4,6,8,10,12 Cores.
- Also available size 0.05sqm to 0.40sq.mm and Cores 2 to 20 Cores.
CORE COLOR IDENTIFICATION
- 2 core – Red + Black
- 3 core – Red + Black + Green
- 4 core – Red + Yellow + Black + Green
- 6 core – Red + Yellow + Blue + Black + Green + White
- 8 core – Red + Yellow + Blue + Black + Green + White + Orange + Brown
- Electrical
- Telecom
- Electronics
- Defense & Aviation
- Computers
- Real Estate
- Railways
- IT/Networking
- Automation system
- Automobiles
- Electric Vehicle
- Charging Stations
Design
SGI – Screened/Braid Shielded Cable consist of fine stranded copper conductors laid up to provide a flexible design. RoHS-FR PVC insulation offers high resistance to increased ambient temperatures, however with a low mechanical resistance to cuts and tearing.
Operating Temperature
* Minimum and maximum permissible -20°C ambient temperature +50°C
* Maximum permissible conductor temperature 70°C
Resistance to Chemicals
Occasional slight exposure to oil and grease is permitted but the cables must not lie continually in oil or grease. They must be protected against fuels and solvents by suitable insulation.
TENSILE STRENGTH
The maximum allowable tensile stress is 12.5 x 1/ mm2. This ensures no conductor damage will occur in operation.
Application
Brochures
View our 2023 SGI Screened/Braid Shielded Multi Core ATC Cable brochure for an easy-to-read guide on all of the variants available.
